AW5601 Industrial Wireless Access Point

Industrial WIFI 5 Access Point with 1x10/100/1000Base-T(X)

Overview AW5601

AW5601 is a rugged, industrial-grade wireless access point suited for harsh conditions. Utilizing the 5GHz frequency band, AW5601 causes minimal interference with existing wireless devices. Besides basic AP/Client modes, an additional WDS Bridge mode allows distribution from a WDS Root to multiple WDS Hybrids and wireless devices. WDS Root and Hybrids have the same wireless MAC address, SSID, and wireless channel settings, forming a larger, more flexible wireless network than simple APs.

The AW5601 features Flash Roaming and PROFINET transparency, empowering AGV/AMR applications with less latency, simpler topologies, and higher efficiency.

AW5601 Access Point

Features AW5601

  • High Speed Air Connectivity:  802.11a/g/n/ac WIFI 5 - 2T2R MIMO
  • Long-Range Transmission: 150m @ 30Mbps, 3km @ 70Mbps directional antenna
  • Industrial Communication mode (Flash Roaming, PROFINET Transparent, and VLAN tag)
  • Flash Roaming (< 25ms @ 2.4GHz / < 5ms @ 5GHz)(IC mode only)
  • Standard Wi-Fi Roaming (802.11r) with <100ms roaming time
  • Versatile operating modes: AP, Client, WDS, WDS Hybrid (Repeater), Industrial Communication
  • PROFINET Transparent mode for addressing NAT & PROFINET deployment
  • Wireless Security: WPA/WPA2/WPA3 PSK/Enterprise
  • Engineered for extreme condition (-30°C to 70°C) with advanced EMC design
  • Streamline device management with NIMBL centralized software
  • Security compliance with EN18031 under RED Directive
  • IP-30 housing design
  • DIN-Rail and Wall-mount enabled
antennas
power supplies

Interfaces

  • 1x WIFI 802.11a/g/n/ac
  • 1x 10/100/1000Base-T(X) Port in RJ45

Antenna and connector: 2.4GHz(3dBi), 5GHz(5dBi), 2 x RP-SMA(M) connectors

Transmission Rate

  • IEEE 802.11a/g: 54 Mbps
  • IEEE 802.11n: 300 Mbps
  • IEEE 802.11ac: up to 867 Mbps

Frequency Band

  • America/FCC : 2.412~2.462 GHz (11 channels) 5GHz Bands 1/4 
  • Europe CE/ETSI : 2.412~2.472 GHz (13 channels) 5.180~5.210 GHz (4 channels)

Models AW5601

AW5601

AW5601-P - PoE PD support

AW5601-IC - Industrial Communication Mode

Models Industrial Communication Mode

Combines advanced features such as Flash Roaming, PROFINET Transparent, and VLAN Tagging

Power

  • Dual DC inputs. 12-48VDC on 3-pin terminal block
  • Power Consumption (Typ.) 6,72 Watts

Environmental

  • Operating Temperature -30 to 70°C
  • Operating Humidity 5% to 95% Non-condensing

Physical Characteristics

  • Dimensions (mm): 47(W) x 90(D) x 110(H)
  • Warranty 5 years

Accessories

  • Power Adapter

  • Regulatory Approvals

    • EMC EN55032: 2015/A11:2020, EN61000-6-4:2007+A1:2011 (Level)
      EN55035:2017/A11:2020, EN61000-6-2:2005+AC:2005 (Level)
      CNS15936
    • EMI FCC 15 15.247, FCC 15E 15.407, EN 301893, EN 300328, NCC LP0002
    • EMS EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN61000-4-8(PFMF))
    • Shock IEC60068-2-27
    • Free Fall IEC60068-2-32
    • Vibration IEC60068-2-6
    • Safety IEC/EN 62368-1, CNS15598-1
    • Security EN 18031
  • MTB