Leading Edge Networking Solutions


EN50155 Industrial 1-port Gigabit High Power PoE Injector ,M12 connector


ORing's TransporterTM series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101GT-M12 PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100/1000 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101GT-M12 EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101GT-M12 PoE Injector. Typically in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer doesn't need to worry about voltage drops caused by cable length. The TINJ-101GT-M12 PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

TINJ 101GT M12 Features
  • Supports 1x10/100/1000 Base-T(X) for power and data Output
  • Fully compliant with IEEE802.3at/802.3af
  • Auto protection for Over Voltage Power Input and over current output
  • Supports Power Output up to 30Watts
  • Supports Power Input range from 12Vdc to 57Vdc
  • Ultra-rugged enclosure M12 connector for toughest industrial usages
  • Wall mounting enabled
TINJ-101GT-M12 TINJ-101GT-M12-24V

- Input Power: 50 ~ 57 VDC voltage power input in M12 connector

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30Watts

- Input Power: 12~57VDC voltage power input in M12 connector

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30 Watts

Operating Temperature -25 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Enclosure: IP40
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Warranty 5 years

  DR-75 series, 75W DIN-Rail power supply
DR-120 series, 120W DIN-Rail power supply
M12C: M12 cable accessories