ALIDEX
Leading Edge Networking Solutions
 

IDS-114HP

Industrial HiPoE (90W) Ethernet Switch 10 port

Overview

Perle IDS-114HP PoE Switches are designed for easy deployment in challenging industrial environments where extensive temperature tolerance, resistance to vibrations and shocks, and compliance with stringent safety standards are required. This low-cost, easy-to-use device combines essential industrial Ethernet networking functionality, real-time deterministic network operation, and advanced rugged performance. While it requires no configuration and will operate instantly as soon as you power it up, the built-in QoS (Quality of Service) support for EtherNet/IP and PROFINET allows for traffic prioritization and effective management of resources.

This versatile switch features full/half-duplex auto-negotiation and auto MDI/MDIX operation, allowing for convenient connection of various network devices. The two SFP fiber ports enable flexible network configuration.

A built-in watchdog feature enables the IDS-114HP switch to operate as an intelligent device to prevent packet loss from powered devices (PDs) in the network. If a PD becomes unresponsive, the IDS-114HP will reboot the device without interrupting other PDs connected to the switch.

The IDS-114HP also provides a relay output contact that triggers an immediate alarm when redundant power fails.

 

ids 114 hp xl

 

 


 

Features

  • Support for full 803.2bt (90W) on 4 Ethernet ports simultaneously
  • PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
  • QoS prioritized messages support for EtherNet/IP and PROFINET
  • Dual DC inputs
  • Metal IP-30 housing; DIN-Rail and wall mounting
  • NEMA TS2 approved for Traffic Control Applications
  • EN 50121-4 certified for railway deployments
 IDS-114HP / IDS-114HP-XT
 

Interfaces

  • 4 x 10/100/1000Base-T(X) (PSE) Ports in RJ45 Auto MDI/MDIX
  • 4 x 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX
  • 2 x 100 / 1000 BaseX (SFP)
  • Alarm contact: One relay output with current 0.5A @ 48V at Normal Open or Normal Close

PoE

270W total PoE power for the unit
Support for full 803.2bt (90W) on 4 Ethernet ports
54-57 VDC (IEEE 803.2bt Type 4), 90W max per port
52-57 VDC (IEEE 803.2at/bt Type 2/3), 60W max per port
46-57 VDC (PoE 802.3af Type 1), 15.4W max per port

Standars

  • UL/IEC 61010-1 and UL/IEC 61010-2
  • UL/EN/IEC 62368-1
  • CE Mark
  • EN61000-6-4 (Emissions for industrial environments)
  • CISPR 32:2015/EN 55032:2015 (Class A)
  • CISPR 24:2010/EN 55024:2010
  • IEC/EN 61000-4-2 / 3 / 4 / 5 / 6 / 8 & 11
  • IEC/EN 61000-6-2
  • EN50121-4
  • IEC 60068-2-6 Fc (Vibration)
  • IEC 60068-2-27 Ea (Shock)

Power
- Redundant Input Power: Dual DC inputs. 46-57VDC on 8-pin terminal block
- Power Consumption (Typ.) 9,8 Watts
- Overload Current Protection Present

Environmental
Operating Temperature: Standar models -10 to 60°C / XT Models -40° to 75°C
Operating Humidity 5% to 95% Non-condensing

Physical Characteristics
Dimensions:45 x 125 x 145 mm (W x D x H)
Enclosure: IP30

Warranty 5 years

Accessories
480W DIN-Rail power supply
240W DIN-Rail power supply
SFP 1Gbps optical transceiver
SFP 100Mbps optical transceiver